Step 11: Putting The Siding On
The last step has arrived! While your panel looks pretty good right now, we want it to look like a professional panel. To do this we add a little "J" flashing around the edge of the panel. This can be a little trick so make sure to watch the video.
What you'll need in this step:
If you would like to learn more about building solar panels just click here
- At least 14 feet of vinyl "J" flashing
- clear silicone
- drill
Cut the J flashing into lengths that fit around the sides of the panel.
What we're going to do is put some silicone inside of the flashing and attach it to the edge of the panel.
I like to drill some holes in the flashing so I can attach it to the panel.
Once the flashing is attached you can leave it to dry and your panel is finished!
If you would like to learn more about building solar panels just click here
You are missing some Flash content that should appear here! Perhaps your browser cannot display it, or maybe it did not initialise correctly.
|
Comments
about diods
hi my name jamel im member i realy like your website
o and i have question in some pannels they have diod but you never
talk about its ok pannel without diod and thanks
my email ajameleddine@gmail.com
Post new comment